- Free shipping from 69 € within Germany
- Secure order
- Easy return shipment
- Service-Hotline 04231 - 66811Mo.-Fr. 9 - 17 h
The UHU Porcelain/Ceramic Special Adhesive is your hero when it comes to repairing porcelain, marble, stoneware and ceramics. It is not only super fast and strong, but also resistant to hot water and temperatures of up to 180 °C.
With the UHU Porcelain/Ceramic Special Adhesive, you always have the ultimate allrounder for repairing porcelain, marble, stoneware and ceramics to hand. Whether you want to save a damaged vase or make an old plate shine again - this adhesive is the perfect solution. Its crystal-clear and fast adhesive formula allows you to repair cracks and breaks in a matter of seconds. The UHU Porcelain/Ceramic Special Adhesive not only impresses with its high strength, but also with its temperature resistance and waterproof properties.
Thanks to its simple application from the pipette, repairs are child's play: simply apply to one of the surfaces to be bonded, position the other object immediately and press firmly - and the bond is made. After approx. 12 hours, you will have a strong adhesive bond that can even withstand temperatures of up to 180 °C.
So let this versatile special adhesive convince you and be ready to repair your porcelain, ceramic and earthenware pieces in no time at all.
Tips to use:
Applicable to: Porcelain, marble, stoneware and ceramics. Not suitable for PE, PP, silicone resins and rubber, PTFE, polystyrene®, fabrics and leather.
Apply with: Directly from the dabber with pipette tip.
Preparations: The surfaces to be bonded must be clean, dry and free of dust and grease.
Application: UHU Special Second Adhesive is applied directly from the pipette to one of the two surfaces to be bonded. The other object to be glued is immediately positioned and pressed firmly into place. You should remove any adhesive residue from the pipette with a paper towel after use.
Time to dry: When the surfaces to be bonded are pressed together after the adhesive has been applied, the adhesive bond polymerizes within seconds (approx. 30 - 120 seconds) and forms a synthetic resin that bonds both surfaces very strongly. Depending on the material properties and the amount of adhesive applied, the bond is hand-tight within seconds or minutes. Final strength is achieved after approx. 12 hours.
Work to finish: Excess or smeared adhesive should be removed as quickly as possible by rubbing with acetone on a lint-free cloth (if suitable for material). Fresh adhesive stains on clothing can also be removed with acetone (test on an invisible area first).
Good to know: This adhesive requires moisture to cure, so the process can be accelerated by breathing on one of the parts to be bonded. Curing may take longer if the humidity is low.
Waterproof 
