It's so easy to design your aroma diffuser jewellery:
Knead the modelling clay well and press it into the casting mould. Leave it to rest for about 4 hours and then carefully remove it from the mould. Smooth the surface with a little water so that there are no visible cracks in the decoration pendants. Use the sponge (included in the modelling tool set) to smooth the edges evenly. Now you can carve in the symbols of your choice. If you do not immediately succeed in engraving them as desired, you can remove the engravings with the sponge and start again. Then leave the decoration pendants to dry for approx. 24 hours.
Coat the decoration pendants with clay sealant after the drying time. This will seal the surfaces of your decoration pendants.
Then pull the cotton cord through the modelled piece. You can now decorate your piece of jewellery with another metal decoration pendant. Then pull the ends of the cotton cord through a wooden bead and knot the ends.
Finally, apply a drop of the oil of your choice to the decoration pendant.
Info: You can also carve symbols after the drying time before sealing the piece of jewellery with clay sealant. However, these cannot be removed again if you do not succeed immediately.
You can find great fragrances and fragrance blends in our shop under craft techniques - natural cosmetics - fragrances and additives.