First choose a motif or draw your personal relief design. Now place the motif under the
Casting mould. For easier handling, cut out the template and attach it to the bottom of the mould with a little Adhesive tape . Important: If you want to transfer lettering, you must print the template mirror-inverted. Draw the lines with the contour liner and let the compound cure for about 3 hours. Then fill the mould as usual with the liquid wax
Now melt the
white eco-casting soap and add the Soap colour . In our decoration example we have chosen Stone Grey and Lavender . Now pour the melted soap into the moulds. Allow the liquid soap to dry thoroughly and carefully remove the finished soap bars from the moulds. The elastic lines of the
Contour liners can be pulled out of the soap with a pointed object
Let the
transparent soap melt, mix in the orange colour and pour it into the desired form. After the drying time, you can remove the finished soap. Tip: You can also place a fir branch in the liquid mass instead of the paint and let it dry.
