How plotting works
Download our SVG file to your PC. Open the Cricut Design Space programme. Go to "Workspace" at the top left. Click on "Upload" in the bar on the left and upload the SVG file.
You will now see the file on your workspace. Select all motifs and click on "Split" under "Layer" on the right. Then select all the motifs individually and click on "Merge" at the bottom right. If you now click on "Create" at the top right, the motifs will be displayed as a whole, just as they will be plotted afterwards. Otherwise, they will appear disassembled and mixed up.
If everything is ok, you can click on "Continue". The plotting process starts.
This is how the motifs are transferred to the candle
After the plotting process, the motifs are weeded: To do this, remove the background, i.e. only the motifs adhere to the carrier film. Now cut the transfer film to size and stick it onto the motifs. Run over it with the scraper. Remove the motifs so that they only adhere to the transfer film.
Place the plotted motifs on the candle and run the scraper over them. Slowly and carefully remove the transfer film. You can use tweezers or a weeding hook to help here.
