This is how you design the stones:
Mix 20 tablespoons of Concrete for Creatives with water in the mixing bowl to a creamy mass. Pour this mixture into both moulds. After filling, tap the mould lightly on the base so that all the air bubbles rise. After approx. 3 hours drying time, carefully remove from the mould and allow to dry for a further 12 hours.
Prime the stones with the casting compound painting primer. After drying, you can paint them with the craft colours and additionally with the night glow colour as desired.
When using the stencil, make sure that it is pressed on firmly. Apply some paint to the edge of the stencil in a line and drag it over the stencil with the squeegee. After use, the stencil and squeegee can be cleaned under running water.
To use the dot painting technique, put some craft paint on a painting palette. Dip the wooden sticks or bamboo skewers into the paint and use them to make an impression on the stone. When dry, dots can also be placed on top of each other.
When everything has dried, coat the stones with the weatherproof impregnation.