The creative concrete is mixed with water according to product instructions to form a creamy mass. The mass can easily be
poured into the finished casting mould "
star shell".
So that the
Acrylic forms can be filled with concrete mass, they are put together and provided with a hole with the hot glue gun. This is burned into each Acrylic form for filling. With a measuring cup the creative concrete is poured into the prepared Acrylic forms .
After the concrete has dried for at least 24 hours, the closed Acrylic forms are lightly tapped all around the table. Then they can be opened carefully and the respective figure can be removed. Possible protruding casting edges are treated with Sandpaper .