This is how the cups and plates are designed:
Preparation
Wash the dishes well or wipe them with glass cleaner so that they are free of grease and dust
Napkin technique
First cut the Napkin as desired and remove the unprinted layers of the For Napkin. those you Napkin technique need the printed only layer. Spread the cup with the Napkin varnish special for porcelain and place it on Napkin the coated area. Coat the motifs again with lacquer and let them dry. Carefully apply the lacquer from the inside to the outside. Tip: You can wipe off too much varnish with a cotton swab. However, you should make sure that the edges of the napkin motifs are well Napkin fixed, otherwise they may come off again after baking
Proceed in the same way with the plate. Make sure that you coat the motifs with the varnish over the edges as well. Burn them Napkin in as described in the product instructions. At VBS Napkins-Lacquer "glass & porcelain" the burning time in the oven is approx. 30 minutes at 160°
Food Clear varnish: safety
Finally the dishes are coated with the food Clear varnish safe lacquer. For cups and mugs we recommend Napkin not to stick them all the way to the edge, so that a drinking rim remains.
