Here's how it's done:
The Acrylic forms share. With the Paint sponge into the little balls white Handicraft paint into the big ball and the medallion may green Handicraft paint. After drying, put all parts back together again.
Melt two holes in the medallion with the metal tip of the hot glue gun and deburr with the side cutter. Glue the small balls with the suspensions into the medallion. Melt a hole in the bottom of the medallion, after deburring
glue it at a slight angle to the suspension of the middle ball.
Apply the Crystal gel to the drilled half of the 16 cm ball with a Spatula and leave to dry overnight. Afterwards, attach the separating disk underneath.
Now melt a large area of the large Acrylic-hemisphere and fix the mounted elements on it. Please make sure that the hole points to the back
Transfer and cut out the templates for hands, feet (2 x each) and flower on Felt . Cut the figure wire, color it with the Paint sponge may green and let it dry.
For the arms and legs melt holes in the middle ball with the hot glue gun, deburr and glue the figure wire. Glue the hands and feet, fix the big ball with the cutting disk and loops from dotted Ribbon on the felt flower. Finally glue the Wobbly eyes and put a LED light chain under the big hemisphere.
