Anleitung: Tischläufer, Sitzkissen und Bestecktasche in romantischem Design

Instructions No. 1242

Instructions No. 1242

Summer time is garden time! For more cosiness and a romantic look in your garden, on the terrace or on the balcony, our self-sewn table runners , seat cushions and cutlery bags will make your garden look more cosy. In this manual we explain how to sew these beautiful accessories quickly and easily. This makes sitting outside even more fun!

And it's that easy:

Cutlery bag:

First of all, you start by cutting the individual components. You will need two cuttings of the pocket, three cuttings of the back (two with cover fabrics and one fleece line cutting), as well as the cuttings of the heartApplicationand the decorative strip (13 cm x 4 cm).

Next, iron a back piece with the fleece on the left side of the fabric. To prevent the iron from sticking, place a piece of baking paper in between.

Fold the decorative strip in half lengthwise and iron. Then fold each half again to the middle fold and iron. The decorative strip is now finished.

Now fold both pocket blanks left to left. At the upper edge, place the decorative strip so that both edges of the fabric are enclosed. Then fix it with Pins and topstitch it with short edges.

Next, fold the fabrics in the following way: place the reinforced piece of fabric with the right side facing upwards. Place the pocket on top of it and finally the other back piece with the right side down. Fix everything with Needles and topstitch all around except for the turning opening at the top (approx. 8 cm).

Now cut the corners with the scissors. Turn the fabric and work out the corners well

Then fold the seam allowances of the turning opening inwards and iron the fabric well again. Then topstitch all around with a narrow edge and close the turning opening.

Then decorate the front pocket with the heartApplication, the button and the crochet flower.

Table runner:

First make the cuttings according to the template

To prevent the fabric from fraying, topstitch the edges of the fabric with a zigzag stitch. Now take the narrower fabric strips (short and long) and fold them in the middle. Iron the resulting fabric strips smooth

In the next step, fold the quilted side edges of the fabric panels inwards (approx. 1 cm) and iron all four sections again.

Then pin the fabric sections to the sides of the large table runner fabric with Pins. Now sew the fabric sections tightly together with a straight stitch, beating the corners of the short sides into a triangle for a nicer look.

Now fix the fabric hearts in the middle of the table runner with the help of the iron-on fleece - ready!

Seat cushion:

For a seat pad measuring 35 x 35 cm, first cut a section of fabric measuring 37 x 85 cm . In addition, there is a heart-shaped section of fabric, which you make according to the pattern.

This cut now includes seam allowances as well as the fabric allowance required for the hotel closure .

Topstitch the edges of the blank with the zigzag stitch and then iron the short edges of the blank neatly in a width of approx. 0.5 cm .

Now turn these edges over another 1 cm wide, iron them and topstitch them with a straight stitch .

Next, the two outer edges must be folded inwards so that the outer parts of the fabric overlap. The left (unprinted) fabric side is now on the outside and will be turned over later. Now close the open sides of the fabric with a straight stitch .

Then turn the pillowcase over and apply the fabric heart to the pillow using the iron and the fleece.