The 3D Hydro Crystal Lacquer is a special water-based thick film varnish that provides a fantastic depth effect. Transparent hardening and suitable for many surfaces - especially for paper mosaic. There are 50 ml included.
The special varnish can be applied in one operation up to a layer thickness of 1 mm on paper, cardboard, glass, ceramics or wood with a brush or spatula. The drying time is approx. 60-180 minutes. Ceramics can subsequently be baked at 130°C for 90 minutes.
For impressive results with a great 3D effect!
Tips for use:
Applicable to: Paper, cardboard / carton, glass, ceramics, wood.
Apply with: Brush, spatula.
Preparations: The surface should be dry, clean and free of grease.
Application: The first coat can be applied up to a thickness of 1 mm and must then cure completely. Subsequently, if desired, additional coats can be applied.
Drying time: 60-180 minutes.
Finishing work: Ceramics and porcelain can be baked at 130°C for 90 minutes.
Good to know: Simply clean brush and spatula directly with water.